Guide

How to calculate board feet

One formula, one division, and a habit of converting feet to inches first. Everything else is arithmetic you can check on paper.

board feet = (length in × width in × thickness in) ÷ 144

All three dimensions in inches. The answer is in board feet.

Why 144?

A board foot is a block of wood 12 inches long, 12 inches wide, and 1 inch thick. Multiply those: 12 × 12 × 1 = 144 cubic inches. So one board foot is 144 cubic inches, and any board’s board feet are its cubic inches divided by 144. That is the whole idea — the formula just counts how many 144-cubic-inch blocks fit in the board.

Worked examples

Example 1 — the standard board

A board 8 ft long, 6 in wide, 1 in thick. Convert the length first: 8 ft = 96 in.

96 × 6 × 1 = 576  ÷  144 = 4 board feet

Example 2 — an 8 ft 2×4

Use the nominal sizes for the tally — 2 and 4, not the dressed 1.5 and 3.5. (Why: nominal vs actual sizes.)

96 × 4 × 2 = 768  ÷  144 = 5.33 board feet

Example 3 — a 10 ft 2×6

10 ft = 120 in.

120 × 6 × 2 = 1,440  ÷  144 = 10 board feet

Example 4 — several identical boards

Calculate one board, then multiply by the quantity. Six boards of Example 1:

4 board feet each × 6 = 24 board feet

For a mixed list, calculate each size separately and add the totals — or let the board-foot calculator hold the whole list.

Feet to inches

The formula needs inches, but lumber is sold in feet. Convert the length before you multiply:

LengthInches
6 ft72
8 ft96
10 ft120
12 ft144
14 ft168
16 ft192

For odd lengths, multiply feet by 12 and add the remaining inches: 8 ft 6 in = 96 + 6 = 102 in.

A useful shortcut skips the conversion: board feet = (length in feet × width in × thickness in) ÷ 12. Check it against Example 1: 8 × 6 × 1 = 48, ÷ 12 = 4. Same answer, one less step — it works because 144 ÷ 12 = 12. If the shortcut ever confuses you, go back to inches and ÷ 144.

Metric measurements

If your tape measure reads in millimetres, you have two honest routes. Convert each dimension to inches first (divide by 25.4) and use the formula above, or work directly in millimetres: one board foot is 2,359,737 mm³, so board feet = (length mm × width mm × thickness mm) ÷ 2,359,737.

Example — metric

A board 2,400 mm × 150 mm × 25 mm:

2,400 × 150 × 25 = 9,000,000  ÷  2,359,737 ≈ 3.81 board feet

The board-foot calculator’s metric mode does this conversion for you and shows the inch equivalent alongside.

Common sizes at 8 feet

The table uses nominal sizes — the sizes lumber is named by. Actual surfaced sizes are smaller; see nominal vs actual lumber sizes before you treat these as exact.

Nominal sizeDimensions (in)Board feet (8 ft board)
1 × 696 × 6 × 14.00
1 × 896 × 8 × 15.33
1 × 1296 × 12 × 18.00
2 × 496 × 4 × 25.33
2 × 696 × 6 × 28.00
2 × 896 × 8 × 210.67
4 × 496 × 4 × 410.67

The four mistakes that cost real money

1. Entering feet as inches. Typing “8” for an 8 ft board gives a number twelve times too small. If your answer looks absurdly low, check the length first. The calculator on this site warns you when a length looks like feet.

2. Using actual sizes for the tally. A 2×4 actually measures 1.5 × 3.5 in, but suppliers tally board feet on the nominal 2 × 4. Computing the tally from dressed sizes understates the order — and the price. Use nominal for the tally, actual for the fit.

3. Forgetting the quantity. The formula gives one board. A cut list of ten identical boards is ten times that number. Count the pieces, then multiply.

4. Rounding too early. Round the total, not each board. Rounding ten boards down by a fraction each quietly deletes a board from your order. This site sums exact values and rounds only the displayed total.

How precise should the answer be?

Two decimals is plenty. Board feet come from rough-sawn, nominal sizes, and the third decimal is theater. This site rounds to two decimals everywhere, and totals are summed from the exact values before rounding, so the tally adds up.

Questions, answered

What is a board foot?

A board foot is a unit of volume: 144 cubic inches — a block 12 in long, 12 in wide, and 1 in thick. Any board with the same volume is one board foot, whatever its shape.

What is the formula for board feet?

Board feet = (length in × width in × thickness in) ÷ 144. For example, 96 × 6 × 1 = 576 ÷ 144 = 4 board feet.

Do I use nominal or actual sizes for the tally?

Nominal sizes. Suppliers tally board feet on the nominal dimensions — the name, not the dressed size. A 2×4 is tallied as 2 × 4, even though it measures 1.5 × 3.5 in. Use actual sizes only for fit.

How do I calculate board feet when the length is in feet?

Convert feet to inches first (feet × 12), then use the same formula. An 8 ft board is 96 in long. Shortcut: board feet = (feet × width in × thickness in) ÷ 12.

Open the board-foot calculator Nominal vs actual sizes

Formula and all four examples last checked 18 November 2026. See the changelog.