Free workshop tool
Board Foot Calculator
Add every board in your project, see the board feet, the cost, and a diagram for each one — then print the tally or share the list with a link. No sign-up, no email gate.
PlankBench — Board Foot Calculator — plankbench.com
Limits — read before you buy. These are estimates from the sizes you enter. Always verify against your supplier’s tally: suppliers count board feet on nominal sizes, and a board’s actual dressed size is smaller (a nominal 2×4 is 1.5 × 3.5 in). No kerf or waste allowance is added here — if you want one, add it yourself as an extra board or a higher quantity, so the number stays honest. Full explanation: nominal vs actual lumber sizes.
How the calculation works
Board feet measure volume, not length. A board foot is a block 12 inches long, 12 inches wide, and 1 inch thick — 144 cubic inches. To find how many board feet a board holds, multiply its three dimensions in inches and divide by 144. That is the whole formula, and it is the same one suppliers use when they tally an order.
Two habits make the number trustworthy. First, convert feet to inches before you multiply: an 8 ft board is 96 in, and entering “8” as the length would give a number twelve times too small — this page warns you if a length looks like feet. Second, use nominal sizes for the tally and actual sizes for the fit: the price follows the nominal tally, while the piece that has to slide into a gap follows the dressed size.
For the full method, worked examples, and the common mistakes, see how to calculate board feet. To price a whole project from a board-foot total, see how to price a project from board feet. Building a deck? The deck board calculator turns a deck area into boards and board feet.
Related guides
How to calculate board feet
The formula, the ÷144 rule, and worked examples you can check by hand.
GuideBoard feet vs linear feet vs square feet
Three measures, three different jobs — and the confusion that makes this tool necessary.
GuideNominal vs actual lumber sizes
Why a 2×4 is 1.5 × 3.5 in, the full size table, and what it means for your tally.
ToolDeck board calculator
Deck area, board width, and spacing → boards needed and total board feet.
Formula and worked example last checked 18 November 2026. The example on this page (96 × 6 × 1 = 4 board feet) is verified by hand on every release — see the changelog.