Guide
How to price a project from board feet
The method is one multiplication — but the price per board foot must come from your supplier, not from a website. This page gives you the method and a worked example; it deliberately quotes no market prices, because prices vary by species, grade, and region, and any number printed here would be stale or wrong for your yard.
The method
- List every board in the project with its size and quantity. The board-foot calculator holds the list and totals it.
- Total the board feet on nominal sizes — the basis suppliers tally on. See nominal vs actual sizes.
- Ask your supplier for the price per board foot for the species and grade you want, on the same nominal basis. Get it in writing if the order is large.
- Multiply. Total board feet × price per board foot = material cost for the lumber.
- Add waste visibly. Cuts, defects, and mistakes are real. Add an explicit allowance — as extra board feet, not as a silent fudge — so the number stays checkable.
- Add the rest separately. Hardware, glue, finish, and delivery are not in the board-foot number. Price them as their own lines.
Worked example
A deck of 115.5 board feet (the worked example from the deck board calculator). The rate below is an example rate chosen to make the arithmetic easy — not a market price. Replace it with your supplier’s rate.
115.5 board feet × $4.50 per board foot = $519.75
With a visible 10% waste allowance added as extra board feet:
115.5 × 1.10 = 127.05 board feet
127.05 × $4.50 = $571.73
The allowance is a line you can see and change — 10% is an illustration, not a recommendation. Complex cuts and mixed lengths waste more; simple straight runs waste less.
Comparing quotes fairly
Two quotes are comparable only on the same basis. Before you compare:
- Confirm both suppliers tally on nominal sizes and the same board-foot total. A quote that looks cheaper may be counting fewer board feet.
- Confirm the species and grade match. Price differences between species are large, and grade changes both price and usable yield.
- Confirm whether the price is for rough or surfaced stock, and whether delivery is included.
- Ask how shorts, defects, and culls are handled — a cheap tally that counts unusable wood is not cheap.
An example comparison on an invented 40 board-foot list, at invented rates, with the same 10% waste line applied to both:
| Supplier | Rate (example) | 40 bf | + 10% waste |
|---|---|---|---|
| Supplier A | $5.50 / bf | $220.00 | $242.00 |
| Supplier B | $6.25 / bf | $250.00 | $275.00 |
The $33 gap between the two totals is real arithmetic on invented rates. Whether Supplier B earns it depends on grade, quality, delivery, and service — things the arithmetic cannot see. Never compare a headline rate without confirming the basis: same species, same grade, same tally, same extras.
The costs people forget
- Delivery. A flat fee or per load — ask whether it is included before you compare rates.
- Cutting charges. Some yards cut to length free; others charge per cut.
- Minimum order or minimum charge. Small lists can cost more per board foot than the headline rate suggests.
- Sorting and selecting. Picking straight boards yourself costs time; paying for a selected bundle costs money.
- Finish and fixings. Screws, glue, oil, and sandpaper are not in the board-foot total — budget them separately.
- Your time. For a commissioned job, the material cost is only part of the quote.
When board feet are not the price basis
Some materials are sold another way, and forcing board-foot math onto them only confuses the quote. Sheet goods (plywood, MDF) are sold by the sheet; trim and molding by the linear foot; rough-sawn slabs by the piece or by weight; some exotics by weight. When a supplier quotes by the piece, take the piece price and check it against the board-foot figure as a sanity check — the two should be in the same neighborhood for the same species and grade.
What moves the price
Species, grade, thickness, rough vs surfaced, length availability, and region all move the per-board-foot price — sometimes sharply. That is why this site never prints a price list: a single number would mislead most readers most of the time. The honest input is always your supplier’s current rate for the exact stock you will buy.
Questions, answered
How do I price a project from board feet?
Total the board feet on nominal sizes, multiply by your supplier’s price per board foot for the species and grade, then add waste, tax, and delivery as separate visible lines.
What is a good price per board foot?
There is no universal figure — it varies by species, grade, width, length, region, and week. Any number on a web page would be stale or wrong for your yard; get the rate from your supplier.
How much waste should I add?
Add it as a visible line you choose. 10% is used on this page only to illustrate the arithmetic, not as a recommendation — complex cuts and mixed lengths waste more; simple straight runs waste less.
Method and worked arithmetic last checked 18 November 2026. No market prices are quoted on this page by design. See the changelog.