Guide

Board feet vs linear feet vs square feet

Three measures with “feet” in the name, three different jobs. Mixing them up is the most common lumber-math error — and the reason the calculator on this site exists.

The three measures, in one table

MeasureWhat it countsUsed for
Board footVolume — 144 cubic inchesPricing lumber, ordering boards
Linear footLength — 12 inches in a lineTrim, molding, fencing runs, deck edging
Square footArea — 144 square inchesFloor and deck coverage, sheet goods

One board, three answers

Take a single board: 8 ft long, 6 in wide, 1 in thick.

Linear feet: 8 — just the length, whatever the width or thickness.
Board feet: (96 × 6 × 1) ÷ 144 = 4 — volume, the tally and the price.
Square feet (one face): 8 ft × 0.5 ft = 4 — the area its face covers.

Notice the trap: board feet and square feet happen to match here (both 4), because the board is exactly 1 inch thick. At any other thickness they diverge. A 2-inch-thick board of the same face has 8 board feet but still covers 4 square feet.

Linear feet: length and nothing else

A linear foot is simply one foot of length along a board, whatever its width or thickness. Ten linear feet of trim is ten feet of trim. It is the right measure when the cross-section is fixed — a length of baseboard, a run of handrail, a board sold by the length.

Linear feet say nothing about how much wood you are getting. Ten linear feet of 1×6 and ten linear feet of 2×12 are the same length and very different amounts of timber. Convert to board feet when volume (and price) is the question:

Example. 10 linear feet of 1×6 (120 in long × 6 in wide × 1 in thick):

120 × 6 × 1 = 720  ÷  144 = 5 board feet

Square feet: area, thickness ignored

A square foot is 144 square inches of surface: length × width, with no thickness involved. Flooring is sold by the square foot because you are covering a floor; a plywood sheet covers 32 square feet (4 × 8 ft) whether it is ½ in or ¾ in thick.

Square feet and board feet coincide only at exactly 1 in thick. That coincidence causes most of the confusion:

Example. A board 10 ft long × 6 in wide covers 5 square feet (120 × 6 = 720 sq in ÷ 144 = 5). At 1 in thick it is also 5 board feet. At 2 in thick it is still 5 square feet — but 10 board feet, because the volume doubled.

5 sq ft × 1 in thick = 5 board ft   ·   5 sq ft × 2 in thick = 10 board ft

The conversion rule: board feet = square feet × thickness in inches. It only works when the thickness is uniform across the whole area.

Which measure does each job need?

Buying boards → board feet. Lumber yards price and tally boards by the board foot. Your cut list total in board feet, times the price per board foot, is the material cost. See how to price a project from board feet.

Buying trim or a run of fencing → linear feet. Trim is priced by the length you take home; the cross-section is fixed by the profile. Measure the run, add the corners and waste, and order that many linear feet.

Covering a floor or a deck → square feet. Area first: length × width of the surface. Then convert the area into boards using the board’s width and gap — which is exactly what the deck board calculator does. A 10 ft × 12 ft deck is 120 square feet; with 6 in boards (0.5 ft of face each, before gaps) that is 120 ÷ 0.5 = 240 linear feet of board — before the gap between boards is counted.

How to convert

Linear feet → board feet: multiply by the board’s cross-section in inches, divided by 12. For a board W inches wide and T inches thick: board feet = linear feet × W × T ÷ 12. Check with our board: 8 × 6 × 1 ÷ 12 = 4. Correct.

Square feet → board feet: multiply by the thickness in inches. A surface of S square feet covered with boards T inches thick holds S × T board feet (before gaps and waste). Check: 4 sq ft × 1 in = 4 board feet. Correct.

Board feet → linear feet: divide by W × T ÷ 12. Our board: 4 ÷ (6 × 1 ÷ 12) = 4 ÷ 0.5 = 8 linear feet. Correct.

Conversions, in one place

FromToHowNeeds
Linear feetBoard feet(length in × width in × thickness in) ÷ 144Width + thickness
Square feetBoard feetsquare feet × thickness in inchesThickness
Board feetSquare feetboard feet ÷ thickness in inchesThickness
Board feetLinear feetboard feet × 144 ÷ (width in × thickness in)Width + thickness

Notice what every conversion needs: the dimensions the starting measure leaves out. There is no conversion from linear feet to board feet without knowing the width and thickness — anyone offering one is guessing.

Questions, answered

How many board feet are in a linear foot?

It depends on the board’s width and thickness: board feet = linear feet × width in × thickness in ÷ 12. There is no fixed conversion without those dimensions.

Are board feet and square feet the same?

Only for boards exactly 1 in thick. Board feet measure volume; square feet measure area. A 2 in thick board covering 4 sq ft holds 8 board feet.

When should I use linear feet instead of board feet?

When the cross-section is fixed and only length varies — trim, molding, and fencing runs. When volume and price are the question, use board feet.

Open the board-foot calculator How to calculate board feet

Examples and conversions last checked 18 November 2026. See the changelog.